HOME
ABOUT
PRODUCTS
LED DISPLAYS
RHINO
POST VIBE
KAESER
ROADGUARD
DENT BREAKAWAY
DESIGNOVATIONS

SAFETY BEAM

CONTACT US

 

TRAFFIC CONTROL & WORK ZONE SAFETY DEVICES

 

 

    

 

 

 

      

Using new blow-mold technology, the ROADGUARD/2 is a double-chambered, 85 lb. barrier that is stronger and lighter than all competitive Jersey-style barriers. The two chambers are structurally interlocked and brass-bolted together with four strong structural foam-molded polyolefin lugs. The double chamber provides two vertical walls in the center of the barrier, delivering added strength and stability.

  

    Drain, Hand Grip & Fork Lift      Two Fill Holes and Caps      Channel for Screens and           Two Flasher Slots

    Slot at Each Corner                                                                 Signage

 

PATENTED LOCKING AND CURVING FEATURES OFFER
MULTIPLE OPTIONS FOR SECURITY AND TRAFFIC CONTROL

                           

Patented design allows for curve up to 15 degrees in either direction at each locked connection.

Two installers, working from a flatbed truck or trailer, can set up a tightly connected barrier line in minutes.                                

 

SUMMARY OF ROADGUARD/2 FEATURES

 

The ROADGUARD/2 is Stronger, More Resilient, Lighter in Weight, and Less Expensive than rotationally molded barriers using low-density polyethylene.

  • Easy to handle, quick to install, 6-feet long, 3.5-feet high,
    2-feet wide at base
  • Weighs ONLY 85 lbs. empty, and a secure 1,600 lbs. when filled with water
  • Patented locking design keeps barriers firmly connected. Locks with all ROADGUARD/2, ROADGUARD and OTW MB 350 barriers.
  • Two (2) fill caps, four (4) drain plugs
  • Fork lift slots, hand grips, and positions for lights and screens
  • Barriers curve up to 15 degrees in each direction at each connection
  • Manufactured with UV inhibitors
  • Available in orange, white, and mixed orange/white colors
  • Approved as a Longitudinal Channelizing Device

ROADGUARD/2 barriers can be purchased without our Locking Ramp device. Without the device, they will nest with barriers made by Armorcast (Guardian™), Remcon (Guardsafe™), Creative Building Products (Safety Barricade), Off the Wall (MB JSS barriers), among others.

Our locking devices can be purchased separately and added to ROADGUARD/2 barriers at a later date.

 

Back to Roadguard Products


THE TRIPLEX GROUP, LLC

P.O. Box 428
New Hope, PA 18938-0428

(800) 833-9557

(215) 862-5077

Fax (215) 862-0775

Home | About | Products | Contact Us |

   

 

Patented interior design

prevents bulging and keeps 

sides straight and trim.

 

Lightweight & easy to handle,

6-feet long, 3.5-feet high,

2-feet wide at base 

 

Weighs 85 lbs. empty, and a  

secure 1,600 lbs. when filled 

with water.

 

Carry slots for easier handling,

fork-lift slots at bottom.

 

Patented locking feature keeps

barriers firmly connected.

 

Top slots for panels, screens, 

signs and flashers.

 

Barrier curves up to 15 degrees 

in each direction at each 

connection.

 

Exclusive Corner Connector

provides 4-way turns from 75° to 105°.

 

All ROADGUARD polyethylene barriers are manufactured with UV Inhibitors.

 

Barriers are available in three colors: Orange and White.

 

 

 
 

webmaster@triplexgroup.com

Copyright 2005, The Triplex Group LLC  - All Rights Reserved